Digitalview DRR-2T, DAB+ Receiver with RS-232.  

The DRR-2T tuner is the ideal choice for the distribution of digital or analogue radio in a multi-room audio environment. With the benefit of two independent DAB+ and FM tuners, the DRR-2T provides the AV system integrator a comprehensive solution for digital radio and FM reception requirements. 

All the necessary rear panel audio output connections are provided for  digital and/or audio output connection.  The front panel includes the system navigation buttons and a high contrast LCD display to show the time, program data and the current system status.

The DRR-2T has also been specifically engineered for integration into small or large scale home automation systems. Two control ports are available for this purpose, these being RS-232 and IR. The RS-232 controller has a full set of control codes to accommodate most AV environments. The IR controller is used when the system requirements are not as demanding or where RS-232 host-end functionality is not available. The DRR-2T is designed for mounting into a 19 inch EIA equipment rack. No special cooling or ventilation requirements are needed.

Main Features of the DRR-2T

• 2 Independent DAB+ and FM/RDS Tuners
• 30 User Assignable Presets each for DAB+ and FM
• Digital Audio Output - S/PDIF Optical and Coaxial
• Home Automation Control Interface - RS-232 and IR with 3.5mm RTS socket
• Designed for EIA 19 inch Rack Mounting

Type:

• Digital / Analog Radio Receiver (DAB+/FM)

Frequency Range:

• FM  87.50MHz to 108MHz
• DAB+ Band 3  174.928MHz to 239.20MHz
• L-Band  1452.960MHz - 1490.624MHz

Supported Audio Formats:

• AAC+

Frequency Response:

• FM  Frequency Response FM: Typically 20Hz - 12.5 kHz @ -3db
• DAB+  Typically 20Hz - 20 kHz and only limited by broadcast

 Analog Audio O/P:

• 20Hz - 20 KHz

Sensitivity:

• FM  -108dbm typical
• DAB and L-Band   - 97dbm typical

Signal to Noise:

• FM  50dbA typical
• DAB  99dbA typical

THD Distortion (Analog Output):

• 0.01% typical

Signal to Noise (Analog Output):

• 97db typical

Antenna Input Impedance:

• DAB, DAB+, FM 75 ohm

Digital Audio Output/s:

• S/PDIF - Optical and Coaxial

Analog Audio Output:

• L & R Channels (RCA)

Control Interface:

• RS-232/V24 (9 pin "D" connector)

Input Voltage / Frequency:

• 180 - 265VAC / 47-60Hz

Power Consumption (max.):

• (max.) < 2.5 Watts

Power in Standby:

• < 0.6 Watt

Operating Temperature:

• 0 - 50oC / 5% -90% Non-condensing

Dimensions (max.):

• 483mm(W) x 219mm(D) x 44mm(H)

Warranty:

• One Year